CX-06-BNC-YI CCTV Surge Protector

Emerson Edco CX-06-BNC-YI CCTV / Data / Coax Surge Protector
Manufacturer part number: CX-06-BNC-YI
Availability: In stock

Edco CX BNC Coax Surge Protector.

The Emerson Edco CX and CCTV surge suppressors offer effective protection for cameras and security related equipment involving coaxial cable connections.

Grounding is an important facet in proper protection. There are many applications where the camera ground reference is different from the head-end equipment ground reference. The standard CX series product internally connects the coax shield to the suppressor ground lug. In the case where the ground references are not the same (two different buildings) then the shield should be connected to ground only at the head-end equipment. Ground currents, which could compromise data quality, can result if the shield is connected to ground via the CX at the camera end. Therefore, the CX-I (isolated shield from ground) option is employed at the camera end. The shield is referenced through a gas tube protector to ground, but is internally isolated to avoid ground currents. If the ground reference at each end of the coax is the same, then the standard CX product can be used with success.


Product tags
Customers who bought this item also bought

PCB1B-WKEY Surge Protector Base

Emerson Edco PCB1B-WKEY Base Connector for EDCO inline Plug-In Modules PCB1B.

PC642C-008LC Surge Protector

Emerson Edco PC642C-008LC 150ma Low Capacitance RS422, RS485 Surge Protector.